iBasso D18 / D-18 / D 18 CROTALUS R2R Portable DAC Amp Original
iBasso D18 CROTALUS
R2R Portable DAC and Amplifier
100% PRODUK RESMI
100% PRODUK ORIGINAL
100% BARANG BARU
GARANSI RESMI 1 TAHUN
FEATURES
• Up to 1750mW Output Power with External Power Supply
• R2R Ultra: 20-bit R2R + 4-bit String DAC
• 8 Channel R2R, Fully Differential Architecture
• FPGA-Master 3.0 with Upgraded Algorithm
• Two TI Dual OPAMPs + Four BUF634A
The iBasso D18 CROTALUS features the manufacturer’s new, internally developed R2R Ultra DAC, which promises sound that is “free” of distortion. In addition, iBasso’s new portable DAC/amp can deliver 1,750 mW into 32 Ω when connected to an external 12 V DC power supply. Further details on this latest release from iBasso are provided below.
SPECIFICATIONS
• Charging: USB-C at 5 V/2 A or DC at 12 V/1.5 A
• Chassis material: Aluminum alloy with a stainless steel rear panel
• DAC: Internally developed R2R Ultra
• Dimensions: 140.4 × 75.3 × 18.8 mm
• Display: 1.3-inch OLED
• Headphone outputs (PO): 3.5 mm single-ended (SE) and 4.4 mm balanced
• Line outputs (LO): 3.5 mm single-ended (SE) and 4.4 mm balanced
• Physical controls: Multifunction knob and power switch
• Weight: 271 g
• Battery specifications
• Battery life: 9 hours
• Charging time: 2.5 hours
• General audio specifications
• Native decoding via USB: PCM up to 768 kHz and DSD512
• Native decoding via coaxial input: PCM up to 768 kHz and DoP256
• Native decoding via optical input: PCM up to 192 kHz and DoP128
• 4.4 mm balanced headphone output specifications
• Output voltage at low gain: 4.2 V RMS
• Output voltage at medium gain: 6.2 V RMS
• Output voltage at high gain: 7.6 V RMS
• Maximum output power on battery: 1,530 mW into 32 Ohm, high gain, distortion < 0.5%
• Maximum output power with an external 12 V DC power supply: 1,750 mW into 32 Ohm, high gain, distortion < 0.5%
• THD+N: −95 dB (0.0017%) at 1 kHz; AES17–20K, A-weighted, 300 Ohm load
• Dynamic range: 128 dB; AES17–20K, A-weighted
• Signal-to-noise ratio: 128 dB; AES17–20K, A-weighted
• Channel separation: 142 dB
• Frequency response: 10 Hz–40 kHz (−1 dB)
• Output impedance: 0.7 Ohm
• Noise floor: 1.5 uV RMS
• 3.5 mm single-ended headphone output specifications
• Output voltage at low gain: 2.1 V RMS
• Output voltage at medium gain: 3.1 V RMS
• Output voltage at high gain: 3.8 V RMS
• Maximum output power on battery: 440 mW into 32 Ohm, high gain, distortion < 0.003%
• Maximum output power with an external 12 V DC power supply: 440 mW into 32 Ohm, high gain, distortion < 0.5%
• THD+N: −93 dB (0.002%) at 1 kHz; AES17–20K, A-weighted, 300 Ohm load
• Dynamic range: 123 dB; AES17–20K, A-weighted
• Signal-to-noise ratio: 123 dB; AES17–20K, A-weighted
• Channel separation: 129 dB
• Frequency response: 10 Hz–40 kHz (−1 dB)
Informasi spesifikasi teknis produk dapat dibaca pada bagian deskripsi atau silakan tanyakan langsung ke customer service kami via WhatsApp.